got a wine cooler to use has wineAdor but...

denali7432

hey guys i used to live in the states and i had no problems keeping my coolerdors working fine, i moved to sydney, australia where the weather is always hot and im not able to keep the temp in my coolerdors low enough..its always reading above 76 degree's, so i bought a wine cooler that unfortunately for me does not have a digital read out of how cool/warm i want it set its just a turn dial..the problem i am having is the cooler it is set the lower the humidity is dropping..i have 65% heartfelt beads and i can eaither get the temp down between 60-70 but the humidity drops to 45-50% or the temp goes about 75 degrees and the humidity gets around 60%

denali7432

i just shut it off now for about 30 minutes and its sitting at 56 degrees and 59%

denali7432

latest reading with wine cooler off, 58 degrees and 68%RH

denali7432

so far with the wine cooler off, its 65 degrees which is great but the humidity has shot up to 95%, and these are heart felt 65% humidity beads wine cooler dimensions are w=19.5'' d=22'' h=33'' 59 bottle capacity and im only using 140grams/ 0.3 LBS of humidity beads

jlmarta

denali7432

i bought 2 pounds so i guess i will throw them all in there.. as of this morning its reading 70 degrees and 99% humidity, instead of beads would i benefit better with going with heartfelts electronic hydra sm or lg humidifier or should i just keep going with more beads?

denali7432

im thinking the electronic humidification wont help me its the beads that i need more off to suck in the humidity, ok noob question..being that my humidity is so high, should i spray the beads or put them in bone dry?

jlmarta

denali7432

i will give that a try my friend, now if i already sprayed the beads what is a good way to dry them out fast as possible or do i just wait and let them dry out on their own?

jlmarta

I've heard that you can use a hair dryer on them but I've also heard that too much heat could cause some beads to crack and possibly make dust. I haven't personally tried a hair dryer. They'll dry out on their own over time. Not to worry. ??

denali7432

thank for the help my friend, currently what ive done is i have it set to warm and the temp is at 70 degree's and i left the door open a crack and the humidity is holding at 71%..i was worried this would burn out the motor in the wine cooler but being set on warm it only came on the first few minutes and now its off..i will keep a eye on it and put in a order for more humidity beads..again thank you for the help..i have not enjoyed a cigar for 6 months since moving here due to temps and the tobacco tax..a man can only take so much lol

jlmarta

Gray4lines

As Marty mentioned, the type of cooler in you wineador matters lot. Most guys go thermoelectric. I think condensors cause problems for stable humidity? And I agree with Marty that more beads will help a lot. it should level out for you in a few day or a week tops. Given how warm it is, and the cooling unit having to run a lot, you will have to experiment with beads and temps to get it where you want it.

jlmarta

PM to ya, Denali..... Check your inbox...

denali7432

thank you for the link my friend, i will pour a dram of bourbon and try to relax a bit here is a link to the exact unit i bought.. http://www.2ndsworld.com.au/lemair-59-bottle-wine-cooler-black-id-LWC59 Lemair LWC59

Gray4lines

Enjoy the bourbon!

denali7432

thank you, a few drams of four roses single barrel is helping the thinking process a bit..lol i threw in a frozen gel ice pack and it seems stable for now..temp is 66 degrees and humidity is steady at 61%..

denali7432

Seems to be stabilizing at 60 degrees and 60% humidity but i am seeing condinsation build up along the sides inside will this be a problem that i need to keep wiping dry or no big deal?

matkn293

I have a feeling this may be a compressor model. Looking for the specs to see. If so you are going to have a heck of a time keeping it stable.

jlmarta

I sent an email to where it was purchased. Got a semi-curt response telling me it has a compressor PER THE MANUAL..... I thought, "Gee, if I had a manual why would I ask"? Oh, well..... ??

jlmarta

matkn293

jlmarta:

I sent an email to where it was purchased. Got a semi-curt response telling me it has a compressor PER THE MANUAL..... I thought, "Gee, if I had a manual why would I ask"? Oh, well..... ??

Their website is not much help either.

jgibv

jlmarta