Adhesive for magnetic humidifiers?
Does anyone have a fool-proof (because I'm a fool) way of getting the metal plates used for magnetic humidifiers to stick to your cedar lids? I've filled two humi's up with kitty litter and tried to use the double stick tape that comes on the plates but way too often when I open mu humi I find this:
not only aggravating but I’m really worried that one of these days it will drop and damage one of my sticks. Hesitant to use any glue both for the smell/fumes and don’t want to damage my lid. Has anyone had this problem? What did you do to fix it?
not only aggravating but I’m really worried that one of these days it will drop and damage one of my sticks. Hesitant to use any glue both for the smell/fumes and don’t want to damage my lid. Has anyone had this problem? What did you do to fix it?
0
Comments
-
i have used it.
back when i was studying architecture and building little models of buildings this was the glue i used. it would hold anything to anything.
the caution?
it will stick anything to anything. and it really sucks when it gets on your hands. its stinky but it sets in a minute or two. then it smells like nothing.
if you are worried about the moisture issues in the humidor keep this in mind:
my father used it to hold a metal cap on the end of his fly fishing rod. its pretty epic stuff.0 -
So short of me gluing my fingers together (a distinct possibility) this stuff sounds like the bomb. Thanks brother, I think I'll be ordering today. Does it have a Crazy-glue like consistancy or more like Elmers/Gorilla?0
-
I only have half of what your looking for. Thought I was gunna have to hook you up. Check this out: http://www.amazon.com/3M-Flexible-Magnet-605005TR-Black/dp/B009PPF0ZG/ref=sr_1_2?ie=UTF8&qid=1362627359&sr=8-2&keywords=3m+magnet0
-
Thanks Drew, that is good stuff but you're right, it's half of what I need. and unfortunately the wrong half. I have magnets glued to the back of the humi's (one of which you sent me...thanks again!) and a metal plate with 2x tape holding it to the lid. It's that tape that wont hold to the lid so the whole humi drops; metal plate, magnet, and humidifier.ddubridge:I only have half of what your looking for. Thought I was gunna have to hook you up. Check this out: http://www.amazon.com/3M-Flexible-Magnet-605005TR-Black/dp/B009PPF0ZG/ref=sr_1_2?ie=UTF8&qid=1362627359&sr=8-2&keywords=3m+magnet0 -
Use the adhesive plus velcro.0
-
I had the same problem and then I just went with beads.0
-
I just bought some good 2 sided tape and it worked fine the stuff that comes with the humidifier just don't seem to holdup.0
-
it acts more like crazy glue but if i am not mistaken it is a clear liquid not a gel.ehehat:So short of me gluing my fingers together (a distinct possibility) this stuff sounds like the bomb. Thanks brother, I think I'll be ordering today. Does it have a Crazy-glue like consistancy or more like Elmers/Gorilla?0 -
I use the 3m adhesive foam squares...they work very well0
-
I tried the two sided foam tape. Started sagging. Used Gorilla Glue. Works great.0
-
Just buy another one of the Humidifiers. They're cheap (or about the same as the glue).
http://www.cigarbid.com/Auction/Search/?cb_search_box=humidifier&ViewType=Grid0 -
Davis, You didnt have any residual smell from Gorilla Glue? this would be easier to get than the Zap product, i was just concerned that my gars might absorb the smell of the glue.webmost:I tried the two sided foam tape. Started sagging. Used Gorilla Glue. Works great.0 -
I considered this but the two i'm using are brand new. pulled the backing off then right on the lid and they still wouldnt stick, have the same problem with both humidifires so I didnt think it was a bad batch.KCW:Just buy another one of the Humidifiers. They're cheap (or about the same as the glue).
http://www.cigarbid.com/Auction/Search/?cb_search_box=humidifier&ViewType=Grid0 -
If you go to your local Home Depot or Lowes, you should find 3M 4200 or 3M 5200. Both apply like flexible caulk, but the bonding strength is incredible.
Used in the marine industry, it can even be used below the waterline. The 4200 is not as strong as the 5200, but plenty more than you need.
I tell people to use the 4200 if they ever want to remove what they are attaching to their boat, and the 5200 if they want it to become part of the boat.
0 -
velcro strips work greeatehehat:Does anyone have a fool-proof (because I'm a fool) way of getting the metal plates used for magnetic humidifiers to stick to your cedar lids? I've filled two humi's up with kitty litter and tried to use the double stick tape that comes on the plates but way too often when I open mu humi I find this:
not only aggravating but I’m really worried that one of these days it will drop and damage one of my sticks. Hesitant to use any glue both for the smell/fumes and don’t want to damage my lid. Has anyone had this problem? What did you do to fix it?0 -
So many great suggestions. Thanks guys, really. Think I'm going with Paul's for now. I would love to stay away from glue if I can and I'd rather stay with magnetic rather than Velcro if I can. Regardless, I'm sure I have it covered with all these. Thanks again.0
-
Well, if you decide to try glue again, I find Elmer's Wood Glue is non-aromatic and works very well.0
